Fascia Repair & Gutter Systems
The fascia board is what every hung gutter actually holds onto — and it's wood, sitting in the splash zone of every gutter failure above it. Free referral to a licensed local pro — one call, no obligation.
The fascia board is what every hung gutter actually holds onto — and it's wood, sitting in the splash zone of every gutter failure above it. Free referral to a licensed local pro — one call, no obligation.
The fascia board is what every hung gutter actually holds onto — and it's wood, sitting in the splash zone of every gutter failure above it. Overflow, backsplash, and ice dams soak it; rot follows; and then hangers pull free and the gutter fails harder. Fascia and gutters are one system: replacing rotted fascia without fixing the water problem recreates the rot, and hanging new gutters on soft fascia wastes the gutters.
These are the specific failure modes licensed installers see most on this work.
Rot behind the gutter line, invisible until hangers lose grip.
Ice dams forcing water over the back edge and down the fascia face.
Missing or short drip edge letting roof runoff wick behind the gutter.
One call to (888) 650-1415 — tell us your ZIP code and what the gutters are doing.
We connect you with a licensed local gutter professional who covers your area.
The pro inspects and quotes the work. No obligation, and the referral costs you nothing.
Your local pro completes the job — installation, repair, or maintenance.
Probe test: a screwdriver pressed into fascia below the gutter line should meet solid resistance. Soft spots, bubbling paint, dark streaks, or hangers that pull out by hand mean sections need replacement before any gutter work.
Usually the gutters themselves misbehaving: overflow running down the face, clogged troughs holding water against the wood, missing drip edge letting runoff wick behind, or ice dams pushing melt over the back edge.
Yes — the fascia is behind them. That's why fascia repair and gutter replacement naturally pair: one mobilization, and the new gutters hang on sound wood with fresh drip edge.
The L-shaped flashing under the first shingle course that directs runoff into the gutter instead of behind it. Missing or short drip edge is one of the most common root causes of fascia rot found during gutter work.
Wood is traditional and paintable but needs the water managed; aluminum wrap armors existing wood; cellular PVC never rots and takes paint. In chronic-moisture spots (behind valleys, north faces), composite options end the repair cycle.
No — wrap over rot seals moisture in and hides the failure while hangers keep loosening. Rot gets cut out and replaced first; wrap protects sound wood only.
Priced per linear foot of replacement plus the gutter rehang; the licensed pro can only firm it up after removal reveals the extent. GutterLinker referrals and quotes are free.
Functioning, clean gutters; correct drip edge; back-flashing at miters; and in ice-dam country, addressing the attic heat loss that builds dams. The carpentry is the cure; the water management is the prevention.
Free referral to a licensed local gutter pro. One call. No obligation.
Call (888) 650-1415 Now